Sample Pack- CA Glue + Accelerator- Bob Smith Industries

Write a review
| Ask a question
Save 16%
filler

Price:
Sale price$35.99 Regular price$42.95

Description

CA Glue Sample Pack

Get the entire selection of our BSI CA glues + a can of accelerator at a discounted price.  You will surely find a use for all of these and be able to decide which ones work best for your needs before purchasing larger sizes. 

Bob Smith Industries produces a variety of Cyanoacrylates (also referred to as CA glue or Super Glue) and epoxy for makers, artisans and craftspeople. These are industrial grade adhesives that are available in a variety of types for any use you may have.  

Each Sample Pack includes:

  • Insta-Cure, Insta-Cure+ and Maxi-Cure-  1 oz bottle of each
  • IC-2000 Black- 1/2 oz bottle
  • Insta-Set aerosol accelerator- 6.75 oz can

About:

Insta-Cure™ thin has a water-like viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam.  Ideal for deep penetrating into wood, mammoth ivory or molar and other similar materials where you need a thin glue to penetrate deep and improve the strength and finish of your materials

Insta-Cure+™ medium is a higher viscosity thickness CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.  This is a good all purpose CA glue choice.

Maxi-Cure™ thick CA is the best CA for most plastics and composites.  MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive.  This can be used for glueing liners and spacer materials together.  In our tests, the Maxi-Cure CA glue proves to be stronger than the actual liner materials it is bonding. Apply the Maxi-Cure in a bead on one surface and then press it together with the other surface to spread the glue.  Slow cure epoxies are still recommended for gluing full scales to knife handles.

IC-2000™ black is a toughened cyanoacrylate that forms superior shock resistant bonds on non-porous surfaces. The black colored CA has added flexibility for the bonding of metals, fiberglass, rubber, carbon-fiber, wood and other advanced materials.  This works well for filling in gaps in stabilized wood.  The flexibility means it will not crack if the material expands or contracts due to temp and moisture.

INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces.

 

Payment & Security

Amazon American Express Apple Pay Discover Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

You may also like

Recently viewed